{
  "id": "allwinner/tanix-tx6s-axp313",
  "vendor": "allwinner",
  "model": "Tanix TX6s AXP313",
  "category": "single-board",
  "status": "open-firmware",
  "aliases": [
    "Tanix TX6s AXP313",
    "tanix-tx6s-axp313"
  ],
  "summary": "Armbian standard configuration (tanix-tx6s-axp313.conf). Kernel branches: current,edge; board family: sun50iw9. Availability and working features depend on the selected image and branch; a build configuration is not an OpenDeviceDB hardware test.",
  "projects": [
    {
      "name": "Armbian (standard configuration; tanix-tx6s-axp313.conf)",
      "url": "https://github.com/armbian/build/blob/45fdf1c7fa68b084b3cd982cec2980fe6d8887fa/config/boards/tanix-tx6s-axp313.conf",
      "kind": "firmware",
      "license": "GPL-2.0",
      "freedom": {
        "notes": "Armbian standard configuration (tanix-tx6s-axp313.conf). Kernel branches: current,edge; board family: sun50iw9. Availability and working features depend on the selected image and branch; a build configuration is not an OpenDeviceDB hardware test. Bootloader, DDR initialization, trusted firmware and peripheral firmware may use vendor binaries. This entry does not establish a fully free firmware stack.",
        "cloud": "none"
      }
    }
  ],
  "install": [
    {
      "project": "Armbian",
      "method": "other",
      "guide": "https://docs.armbian.com/User-Guide_Getting-Started/",
      "difficulty": "medium",
      "firmware_constraints": "Use the exact Tanix TX6s AXP313 board revision and an image for the selected kernel branch (current,edge). standard configuration.",
      "notes": "Check upstream image availability and the board-specific page. SD, eMMC, SPI and USB installation routes vary by board; no universal media or recovery procedure is implied."
    }
  ],
  "provenance": {
    "sources": [
      "armbian"
    ]
  },
  "updated": "2026-11-16"
}