{
  "id": "aquacomputer/quadro",
  "vendor": "Aquacomputer",
  "model": "Quadro",
  "category": "peripheral",
  "status": "controllable",
  "summary": "Temperature, flow and fan telemetry, with direct fan PWM control. Source-qualified Linux driver support; not an OpenDeviceDB hardware test.",
  "identifiers": {
    "usb": [
      "0c70:f00d"
    ]
  },
  "interfaces": [
    {
      "name": "Aquacomputer USB HID / Linux hwmon",
      "transport": "usb",
      "status": "partial",
      "spec": "https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/blob/9ae7fd514d635f2d8bc5cdfefbbeecd4198641e9/docs/aquacomputer_d5next.rst",
      "notes": "Per-device sensor/control coverage is documented upstream. The driver communicates with the installed device firmware through HID reports."
    }
  ],
  "projects": [
    {
      "name": "aquacomputer_d5next Linux hwmon driver",
      "url": "https://github.com/aleksamagicka/aquacomputer_d5next-hwmon",
      "kind": "driver",
      "license": "GPL-2.0-or-later",
      "freedom": {
        "cloud": "none",
        "notes": "Local host driver using USB HID. The installed device firmware remains in use; the driver license does not establish the device firmware license."
      }
    },
    {
      "name": "Aquacomputer hwmon device documentation",
      "url": "https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/blob/9ae7fd514d635f2d8bc5cdfefbbeecd4198641e9/docs/aquacomputer_d5next.rst",
      "kind": "protocol-doc"
    }
  ],
  "install": [
    {
      "project": "aquacomputer_d5next Linux hwmon driver",
      "method": "host-software",
      "guide": "https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/blob/9ae7fd514d635f2d8bc5cdfefbbeecd4198641e9/README.md#compiling-and-installation",
      "difficulty": "medium",
      "tools": [
        "Linux with aquacomputer_d5next driver enabled",
        "lm-sensors (optional)"
      ],
      "notes": "Listed driver support: Linux 6.0 or later. These are upstream mainline baselines from the source overview; distribution configuration/backports and standalone-driver features can differ. Prefer the driver supplied by the distribution where available; consult the linked guide for the optional out-of-tree module. This route installs host software, not replacement device firmware."
    }
  ],
  "verification": [
    {
      "method": "none",
      "by": "OpenDeviceDB source review (AI-assisted)",
      "date": "2026-11-04",
      "notes": "USB ID checked against the pinned driver match table and model/function scope against its README and device documentation. No hardware, kernel-module, cooling or firmware test performed."
    }
  ],
  "provenance": {
    "sources": [
      "curated",
      "https://github.com/liquidctl/liquidctl/discussions/942#discussioncomment-19403517",
      "https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/blob/9ae7fd514d635f2d8bc5cdfefbbeecd4198641e9/README.md",
      "https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/blob/9ae7fd514d635f2d8bc5cdfefbbeecd4198641e9/aquacomputer_d5next.c",
      "https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/blob/9ae7fd514d635f2d8bc5cdfefbbeecd4198641e9/docs/aquacomputer_d5next.rst"
    ],
    "ai_assisted": true
  },
  "updated": "2026-11-04"
}