{
  "id": "b-q-consulting/station-g1",
  "vendor": "B&Q Consulting",
  "model": "Station G1",
  "category": "radio",
  "status": "open-firmware",
  "aliases": [
    "Station G1",
    "STATION_G1",
    "station-g1"
  ],
  "summary": "Meshtastic LoRa mesh firmware listing. Upstream hardware model 25 (STATION_G1), target station-g1, architecture esp32. Listed as actively supported. Upstream support-level code: 3. Board revisions, attached radio modules and frequency variants must match the upstream instructions. This is not an OpenDeviceDB hardware test.",
  "projects": [
    {
      "name": "Meshtastic (station-g1; active)",
      "url": "https://github.com/meshtastic/web-flasher/blob/6b3b34722106f282eb66162164dd40f1729e7826/public/data/hardware-list.json",
      "kind": "firmware",
      "license": "GPL-3.0",
      "freedom": {
        "cloud": "none",
        "nonfree": [
          "wifi",
          "bluetooth"
        ],
        "notes": "Upstream hardware model 25 (STATION_G1), target station-g1, architecture esp32. Listed as actively supported. Upstream support-level code: 3. Board revisions, attached radio modules and frequency variants must match the upstream instructions. This is not an OpenDeviceDB hardware test. ESP32 wireless stacks may require vendor blobs; this index does not audit every component's freedom."
      }
    }
  ],
  "install": [
    {
      "project": "Meshtastic",
      "method": "other",
      "guide": "https://meshtastic.org/docs/getting-started/flashing-firmware/",
      "installer": "https://flasher.meshtastic.org/",
      "difficulty": "medium",
      "firmware_constraints": "Select the exact station-g1 board target and hardware revision.  Use the flashing method documented for this board; the browser flasher does not support every architecture.",
      "notes": "Read the hardware and installation documentation for the complete board/module combination and existing bootloader before installing."
    }
  ],
  "provenance": {
    "sources": [
      "meshtastic"
    ]
  },
  "updated": "2026-11-16"
}