{
  "id": "lilygo/t-watch-s3",
  "vendor": "LILYGO",
  "model": "T-Watch-S3",
  "category": "wearable",
  "status": "open-firmware",
  "aliases": [
    "LILYGO T-Watch-S3",
    "lilygo_twatch_s3",
    "LILYGO T-Watch S3",
    "T_WATCH_S3",
    "t-watch-s3"
  ],
  "summary": "CircuitPython 10.3.2 board definition lilygo_twatch_s3 (ESP32S3). Modules and working features are specific to the board and release. USB IDs identify CircuitPython firmware, can change with firmware or bootloader, and do not uniquely prove a physical board. This is not an OpenDeviceDB hardware test.",
  "projects": [
    {
      "name": "CircuitPython 10.3.2 (lilygo_twatch_s3)",
      "url": "https://github.com/adafruit/circuitpython/tree/10.3.2/ports/espressif/boards/lilygo_twatch_s3",
      "kind": "firmware",
      "license": "MIT",
      "freedom": {
        "nonfree": [
          "wifi",
          "bluetooth"
        ],
        "cloud": "none",
        "notes": "CircuitPython 10.3.2 board definition lilygo_twatch_s3 (ESP32S3). Modules and working features are specific to the board and release. USB IDs identify CircuitPython firmware, can change with firmware or bootloader, and do not uniquely prove a physical board. This is not an OpenDeviceDB hardware test. Espressif wireless stacks include vendor binaries."
      }
    },
    {
      "name": "Meshtastic (t-watch-s3; active)",
      "url": "https://github.com/meshtastic/web-flasher/blob/6b3b34722106f282eb66162164dd40f1729e7826/public/data/hardware-list.json",
      "kind": "firmware",
      "license": "GPL-3.0",
      "freedom": {
        "cloud": "none",
        "notes": "Upstream hardware model 51 (T_WATCH_S3), target t-watch-s3, architecture esp32-s3. Listed as actively supported. Upstream support-level code: 1. Board revisions, attached radio modules and frequency variants must match the upstream instructions. This is not an OpenDeviceDB hardware test. ESP32 wireless stacks may require vendor blobs; this index does not audit every component's freedom."
      }
    }
  ],
  "install": [
    {
      "project": "CircuitPython",
      "method": "other",
      "guide": "https://circuitpython.org/downloads",
      "difficulty": "medium",
      "firmware_constraints": "Select the exact lilygo_twatch_s3 board and the intended release. Memory sizes and hardware revisions can require different builds.",
      "notes": "Follow the board's own download/installation page. UF2 drag-and-drop, serial flashing and debug-probe routes differ; do not use an image for a similarly named board."
    },
    {
      "project": "Meshtastic",
      "method": "other",
      "guide": "https://meshtastic.org/docs/getting-started/flashing-firmware/",
      "installer": "https://flasher.meshtastic.org/",
      "difficulty": "medium",
      "firmware_constraints": "Select the exact t-watch-s3 board target and hardware revision.  Use the flashing method documented for this board; the browser flasher does not support every architecture.",
      "notes": "Read the hardware and installation documentation for the complete board/module combination and existing bootloader before installing."
    }
  ],
  "provenance": {
    "sources": [
      "circuitpython",
      "meshtastic"
    ]
  },
  "updated": "2026-11-16",
  "identifiers": {
    "usb": [
      "303a:821c"
    ],
    "chips": [
      "ESP32S3"
    ]
  },
  "interfaces": [],
  "claims": [],
  "verification": []
}