{
  "id": "netgear/rax120-v2",
  "vendor": "NETGEAR",
  "model": "RAX120 v2",
  "category": "router",
  "identifiers": {
    "chips": [
      "Qualcomm IPQ8074A"
    ],
    "fcc_id": [
      "PY317300397"
    ]
  },
  "status": "open-firmware",
  "projects": [
    {
      "name": "OpenWrt",
      "url": "https://openwrt.org/toh/hwdata/netgear/netgear_rax120_v2",
      "kind": "firmware",
      "license": "GPL-2.0"
    }
  ],
  "install": [
    {
      "project": "OpenWrt",
      "method": "other",
      "guide": "https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=4d79a65d607c471eab04a3821000d1a37440da33",
      "installer": "https://firmware-selector.openwrt.org/?version=24.10.5&target=qualcommax%2Fipq807x&id=netgear_rax120v2",
      "difficulty": "medium",
      "notes": "The Table of Hardware does not record the install method. A factory image exists (it is made to replace the stock firmware, usually through its upgrade page or recovery mode): read the guide first. Table of Hardware note: Flash *-squashfs-web-ui-factory.img from stock UI, then from OpenWrt flash the *-squashfs-sysupgrade.bin using LuCI or the command line."
    }
  ],
  "provenance": {
    "sources": [
      "openwrt"
    ]
  },
  "updated": "2026-10-17"
}