{
  "id": "netgear/wndap660",
  "vendor": "NETGEAR",
  "model": "WNDAP660",
  "category": "router",
  "identifiers": {
    "chips": [
      "AppliedMicro APM82181"
    ],
    "fcc_id": [
      "PY312200203",
      "NKR-DNXAG1"
    ]
  },
  "status": "open-firmware",
  "projects": [
    {
      "name": "OpenWrt",
      "url": "https://openwrt.org/toh/hwdata/netgear/netgear_wndap660",
      "kind": "firmware",
      "license": "GPL-2.0"
    }
  ],
  "install": [
    {
      "project": "OpenWrt",
      "method": "serial",
      "guide": "https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=d82d84694e60d17a79a57fdb135e382f4def907c",
      "installer": "https://firmware-selector.openwrt.org/?version=25.12.0&target=apm821xx%2Fnand&id=netgear_wndap660",
      "difficulty": "hard",
      "tools": [
        "USB-serial adapter (3.3 V)",
        "Computer with a TFTP server",
        "Ethernet cable"
      ],
      "opens_device": true,
      "notes": "Table of Hardware method: U-Boot TFTP + serial recovery (flash from the bootloader over a serial console). Table of Hardware note: Currently requires connection to external RS232 (not TTL) serial port (9600,8n1) with Cisco Console compatible 8P8C (\"RJ45\") cable. Detailed installation instructions can be found at the \"Supported Since Commit\" link at the top of this page. Modify instructions to match the filename you are insta..."
    }
  ],
  "provenance": {
    "sources": [
      "openwrt"
    ]
  },
  "updated": "2026-10-17"
}