{
  "id": "radxa/zero",
  "vendor": "Radxa",
  "model": "Zero",
  "aliases": [
    "Zero (S905Y2, eMMC Only) [Android TV]",
    "radxa0",
    "Zero (S905Y2, eMMC Only) [Tablet]",
    "radxa0_tab",
    "radxa-zero"
  ],
  "category": "single-board",
  "status": "open-firmware",
  "projects": [
    {
      "name": "LineageOS 22.2 (radxa0)",
      "url": "https://wiki.lineageos.org/devices/radxa0/",
      "kind": "firmware",
      "license": "Apache-2.0"
    },
    {
      "name": "LineageOS 22.2 (radxa0_tab)",
      "url": "https://wiki.lineageos.org/devices/radxa0_tab/",
      "kind": "firmware",
      "license": "Apache-2.0"
    },
    {
      "name": "Nura/postmarketOS (testing, radxa-zero)",
      "url": "https://gitlab.postmarketos.org/postmarketOS/pmaports/-/tree/main/device/testing/device-radxa-zero",
      "kind": "firmware",
      "license": "GPL-3.0"
    },
    {
      "name": "Nura/postmarketOS wiki: Radxa Zero (radxa-zero)",
      "url": "https://wiki.nura.eco/wiki/Radxa_Zero_(radxa-zero)",
      "kind": "other",
      "license": "CC-BY-SA-4.0"
    }
  ],
  "install": [
    {
      "project": "LineageOS",
      "method": "usb-bootloader",
      "guide": "https://wiki.lineageos.org/devices/radxa0/install/",
      "difficulty": "medium",
      "tools": [
        "Linux computer with Amlogic's update tool",
        "USB cable"
      ],
      "notes": "Uses Amlogic's burn mode. Installing wipes all data on the device: back it up first."
    },
    {
      "project": "LineageOS",
      "method": "usb-bootloader",
      "guide": "https://wiki.lineageos.org/devices/radxa0_tab/install/",
      "difficulty": "medium",
      "tools": [
        "Linux computer with Amlogic's update tool",
        "USB cable"
      ],
      "notes": "Uses Amlogic's burn mode. Installing wipes all data on the device: back it up first."
    },
    {
      "project": "Nura/postmarketOS",
      "method": "other",
      "guide": "https://wiki.nura.eco/wiki/Radxa_Zero_(radxa-zero)",
      "difficulty": "medium",
      "tools": [
        "Computer with pmbootstrap, or a prebuilt image",
        "SD card or USB drive, where the device boots from one"
      ],
      "notes": "No flasher: the image is written to an SD card, USB drive or the internal storage as the device page describes. This is a testing port: what works varies, check the device page."
    }
  ],
  "provenance": {
    "sources": [
      "lineageos",
      "postmarketos"
    ]
  },
  "updated": "2026-10-17",
  "identifiers": {
    "chips": [
      "Amlogic S905Y2"
    ]
  },
  "interfaces": [],
  "claims": [],
  "verification": []
}