{
  "id": "sky-watcher/star-adventurer-gti",
  "vendor": "Sky-Watcher",
  "model": "Star Adventurer GTI",
  "category": "telescope",
  "status": "controllable",
  "summary": "Telescope mount with a dedicated INDI driver, indi_staradventurergti_telescope. The upstream guide requires exclusive control: disconnect the Synscan App before connecting INDI after initial alignment. This is host-side control, not replacement mount firmware or a hardware test by OpenDeviceDB.",
  "projects": [
    {
      "name": "INDI Star Adventurer GTI driver",
      "url": "https://drivers.indilib.org/mounts/sky-watcher/star-adventurer-gti/star-adventurer-gti/",
      "kind": "driver",
      "freedom": {
        "notes": "The INDI driver communicates with the existing mount firmware. The driver documentation does not establish the license of every embedded component."
      }
    }
  ],
  "install": [
    {
      "project": "INDI Star Adventurer GTI driver",
      "method": "host-software",
      "guide": "https://drivers.indilib.org/mounts/sky-watcher/star-adventurer-gti/star-adventurer-gti/",
      "difficulty": "medium",
      "firmware_constraints": "Do not control the mount through Synscan App and INDI simultaneously. After initial alignment in Synscan App, fully disconnect that app before connecting the INDI driver, as required by the upstream connectivity guide.",
      "notes": "Install INDI and choose the dedicated Star Adventurer GTI driver."
    }
  ],
  "provenance": {
    "sources": [
      "curated"
    ],
    "ai_assisted": true
  },
  "updated": "2026-11-01"
}