{
  "id": "wyze/cam-v3",
  "vendor": "Wyze",
  "model": "Cam v3",
  "category": "ip-camera",
  "identifiers": {
    "chips": [
      "T31AL",
      "GC2053",
      "ATBM6031",
      "T31X",
      "RT5370",
      "RTL8189FTV"
    ]
  },
  "status": "open-firmware",
  "projects": [
    {
      "name": "thingino (T31AL, GC2053, ATBM6031)",
      "url": "https://github.com/themactep/thingino-firmware/tree/master/configs/cameras/wyze_cam3_t31al_gc2053_atbm6031",
      "kind": "firmware",
      "license": "MIT"
    },
    {
      "name": "thingino (T31X, GC2053, ATBM6031)",
      "url": "https://github.com/themactep/thingino-firmware/tree/master/configs/cameras/wyze_cam3_t31x_gc2053_atbm6031",
      "kind": "firmware",
      "license": "MIT"
    },
    {
      "name": "thingino (T31X, GC2053, RT5370)",
      "url": "https://github.com/themactep/thingino-firmware/tree/master/configs/cameras/wyze_cam3_t31x_gc2053_rt5370",
      "kind": "firmware",
      "license": "MIT"
    },
    {
      "name": "thingino (T31X, GC2053, RTL8189FTV)",
      "url": "https://github.com/themactep/thingino-firmware/tree/master/configs/cameras/wyze_cam3_t31x_gc2053_rtl8189ftv",
      "kind": "firmware",
      "license": "MIT"
    }
  ],
  "install": [
    {
      "project": "thingino",
      "method": "spi-programmer",
      "guide": "https://github.com/themactep/thingino-firmware/wiki/Installation:-General",
      "difficulty": "hard",
      "tools": [
        "SPI flash programmer (CH341A)",
        "SOIC-8 test clip"
      ],
      "opens_device": true,
      "reversible": "yes",
      "notes": "Back up the stock flash first. Some cameras can instead be flashed without opening them, from an SD card or over USB with the Ingenic cloner, or through a serial console: see the guide and the camera's wiki page, if it has one."
    }
  ],
  "provenance": {
    "sources": [
      "thingino"
    ]
  },
  "updated": "2026-10-17"
}