{
  "id": "xunlong/orange-pi-zero-3",
  "vendor": "Xunlong",
  "model": "Orange Pi Zero 3",
  "aliases": [
    "xunlong-orangepi-zero3"
  ],
  "category": "single-board",
  "identifiers": {
    "chips": [
      "Allwinner H618"
    ]
  },
  "status": "open-firmware",
  "projects": [
    {
      "name": "Nura/postmarketOS (testing, xunlong-orangepi-zero3)",
      "url": "https://gitlab.postmarketos.org/postmarketOS/pmaports/-/tree/main/device/testing/device-xunlong-orangepi-zero3",
      "kind": "firmware",
      "license": "GPL-3.0"
    },
    {
      "name": "Nura/postmarketOS wiki: Xunlong Orange Pi Zero 3 (xunlong-orangepi-zero3)",
      "url": "https://wiki.nura.eco/wiki/Xunlong_Orange_Pi_Zero_3_(xunlong-orangepi-zero3)",
      "kind": "other",
      "license": "CC-BY-SA-4.0"
    }
  ],
  "install": [
    {
      "project": "Nura/postmarketOS",
      "method": "other",
      "guide": "https://wiki.nura.eco/wiki/Xunlong_Orange_Pi_Zero_3_(xunlong-orangepi-zero3)",
      "difficulty": "medium",
      "tools": [
        "Computer with pmbootstrap, or a prebuilt image",
        "SD card or USB drive, where the device boots from one"
      ],
      "notes": "No flasher: the image is written to an SD card, USB drive or the internal storage as the device page describes. This is a testing port: what works varies, check the device page."
    }
  ],
  "provenance": {
    "sources": [
      "postmarketos"
    ]
  },
  "updated": "2026-10-17"
}