OpenDeviceDB

Devices / other

BlitzWolf BH-AP2501

Open firmwareImported

A free replacement firmware exists.

Get started

One known way to put open firmware or software on this device, easiest first. Each one links to the project's own instructions.

Before you start
  • Back up your data and settings (and the stock firmware, when the guide says how).
  • Check the exact model, hardware revision and firmware version against the guide: a close model may not work.
  • Charge the battery or use a stable power supply; do not unplug during the install.

Install ESPHome

Hard

Opening, soldering or a programmer · ESPHome

You need
Soldering iron, Replacement ESP module
Device opened
Yes
Brick risk
Medium
Reversible
Partly

The original chip must be desoldered and replaced with a supported module before flashing.

No install report yet. · Report how it went

Follow the official guide

OpenDeviceDB links to each project's own instructions and tools; nothing is flashed from this site. Flashing is at your own risk and may void the warranty.

ID
blitzwolf/bh-ap2501
Category
other
Vendor support
Unknown
chips
ESP8266
Updated
2026-10-17
Curate this record on GitHubJSONClaim this device

Being worked on

No live claim. If you start working on this device, claim it so nobody duplicates your work.

Interfaces

No interface documented yet.

Projects

ProjectKindOriginLicense
ESPHomefirmwarecommunitynot stated

Verification

Not verified. A "verified on hardware" badge requires a replayable test (hardware-replay) run on a real device with a stated firmware version.

Provenance

AI assistance not stated.

Status and claims as of the build date (2026-10-18). Data licensed CC BY-SA 4.0; imported data keeps its upstream license.