Devices / router
EDUP EP-RT2983
Open firmwareImported
A free replacement firmware exists.
Get started
One known way to put open firmware or software on this device, easiest first. Each one links to the project's own instructions.
Before you start- Back up your data and settings (and the stock firmware, when the guide says how).
- Check the exact model, hardware revision and firmware version against the guide: a close model may not work.
- Charge the battery or use a stable power supply; do not unplug during the install.
Upload OpenWrt in the stock web interface
EasyNo tools, the device stays closed · OpenWrt
- You need
- Computer with a web browser
- Device opened
- No
- Brick risk
- Low
Table of Hardware method: GUI OEM (upload the factory image through the stock firmware's upgrade page).
No install report yet. · Report how it went
OpenDeviceDB links to each project's own instructions and tools; nothing is flashed from this site. Flashing is at your own risk and may void the warranty.
- ID
- edup/ep-rt2983
- Category
- router
- Vendor support
- Unknown
- chips
- MediaTek MT7621AT
- fcc id
- T58N6TR
- Updated
- 2026-10-17
Being worked on
No live claim. If you start working on this device, claim it so nobody duplicates your work.
Interfaces
No interface documented yet.
Projects
| Project | Kind | Origin | License |
|---|
| OpenWrt | firmware | community | GPL-2.0 |
Verification
Not verified. A "verified on hardware" badge requires a replayable test (hardware-replay) run on a real device with a stated firmware version.
Provenance
AI assistance not stated.
Status and claims as of the build date (2026-10-18). Data licensed CC BY-SA 4.0; imported data keeps its upstream license.