Install ESPHome
EasyNo tools, the device stays closed · ESPHome
- Device opened
- No
- Brick risk
- None
Ships with ESPHome: adopt it in the ESPHome dashboard or Home Assistant; nothing to flash.
No install report yet. · Report how it went
Get started
One known way to put open firmware or software on this device, easiest first. Each one links to the project's own instructions.
Before you start
- Back up your data and settings (and the stock firmware, when the guide says how).
- Check the exact model, hardware revision and firmware version against the guide: a close model may not work.
- Charge the battery or use a stable power supply; do not unplug during the install.
OpenDeviceDB links to each project's own instructions and tools; nothing is flashed from this site. Flashing is at your own risk and may void the warranty.
- ID
- everything/presence-lite
- Category
- sensor
- Vendor support
- Unknown
- chips
- ESP32
- Updated
- 2026-10-17
Being worked on
No live claim. If you start working on this device, claim it so nobody duplicates your work.
Interfaces
No interface documented yet.
Projects
| Project | Kind | Origin | License |
|---|---|---|---|
| ESPHome | firmware | community | not stated |
Verification
Not verified. A "verified on hardware" badge requires a replayable test (hardware-replay) run on a real device with a stated firmware version.
Provenance
- ESPHome Devices (GPL-3.0, fetched 2026-10-17) · about this source
AI assistance not stated.
Status and claims as of the build date (2026-10-18). Data licensed CC BY-SA 4.0; imported data keeps its upstream license.