Fujifilm XF-1
Part of the protocol is documented (e.g. telemetry, not control).
Fujihack documents its RTOS API and patches its firmware 1.01 with a USB debugger (experimental).
Get started
One known way to put open firmware or software on this device, easiest first. Each one links to the project's own instructions.
- Back up your data and settings (and the stock firmware, when the guide says how).
- Check the exact model, hardware revision and firmware version against the guide: a close model may not work.
- Charge the battery or use a stable power supply; do not unplug during the install.
Install Fujihack from an SD card
Install: hard
Install Fujihack from an SD cardOpening, soldering or a programmer · Fujihack
- You need
- Computer with a C toolchain, SD card, USB cable
- Device opened
- No
- Brick risk
- High
- Reversible
- Partly
- Firmware
- Built against Fujifilm firmware 1.01.
A patched firmware update is built from Fujifilm's own and installed from the card like an official update; the USB debugger then runs code on the camera. Experimental: a bad patch can brick the camera and its boot ROM recovery is not reverse engineered. Flashing an unmodified official update restores it if the camera still boots.
No install report yet. · Report how it went
OpenDeviceDB links to each project's own instructions and tools; nothing is flashed from this site. Flashing is at your own risk and may void the warranty.
- ID
- fujifilm/xf-1
- Category
- camera
- Vendor support
- Unknown
- Updated
- 2026-11-01
Being worked on
No live claim. If you start working on this device, claim it so nobody duplicates your work.
Interfaces
No interface documented yet.
Projects
| Project | Kind | Origin | License | Freedom |
|---|---|---|---|---|
| Fujihack | firmware | community | GPL-3.0-only | Still non-free: stock firmware · Cloud: noneA patch on top of Fujifilm's firmware, which stays. |
What "still non-free" and "cloud" mean
What "still non-free" and "cloud" meanWhat stays proprietary or depends on the vendor's cloud once the project is in use, from the project's own documentation.
- vendor blobs
- proprietary files extracted from the stock firmware
- stock firmware
- the stock firmware stays on the device; the project only talks to it
- modem
- cellular modem firmware
- GPU
- graphics driver or firmware
- Wi-Fi
- Wi-Fi driver or firmware
- Bluetooth
- Bluetooth firmware
- camera
- camera driver or image processing
- sensors
- sensor hub or sensor drivers
- bootloader
- boot firmware
- other
- another proprietary part
- Cloud: none
- works fully locally
- Cloud: only at setup
- a vendor account is needed once, e.g. to obtain a local key
- Cloud: optional
- cloud features exist but are not needed
- Cloud: required
- does not work without the vendor's cloud
- Cloud: unknown
- not known
Verification
Not verified. A "verified on hardware" badge requires a replayable test (hardware-replay) run on a real device with a stated firmware version.
Provenance
- Fujihack (GPL-3.0-only, fetched 2026-11-01) · about this source
AI assistance not stated.
Status and claims as of the build date (2026-11-01). Data licensed CC BY-SA 4.0; imported data keeps its upstream license.