Heltec Wireless Paper
Also known as Heltec Wireless Paper, heltec_wireless_paper, HELTEC_WIRELESS_PAPER, heltec-wireless-paper
A free replacement firmware exists.
CircuitPython 10.3.2 board definition heltec_wireless_paper (ESP32S3). Modules and working features are specific to the board and release. USB IDs identify CircuitPython firmware, can change with firmware or bootloader, and do not uniquely prove a physical board. This is not an OpenDeviceDB hardware test.
Get started
2 known ways to put open firmware or software on this device, easiest first. Each one links to the project's own instructions.
- Back up your data and settings (and the stock firmware, when the guide says how).
- Check the exact model, hardware revision and firmware version against the guide: a close model may not work.
- Charge the battery or use a stable power supply; do not unplug during the install.
Install CircuitPython
Install: mediumNeeds a cable or the command line · CircuitPython
- Device opened
- No
- Firmware
- Select the exact heltec_wireless_paper board and the intended release. Memory sizes and hardware revisions can require different builds.
Follow the board's own download/installation page. UF2 drag-and-drop, serial flashing and debug-probe routes differ; do not use an image for a similarly named board.
No install report yet. · Report how it went
Install Meshtastic
Install: mediumNeeds a cable or the command line · Meshtastic
- Device opened
- No
- Firmware
- Select the exact heltec-wireless-paper board target and hardware revision. Use the flashing method documented for this board; the browser flasher does not support every architecture.
Read the hardware and installation documentation for the complete board/module combination and existing bootloader before installing.
No install report yet. · Report how it went
OpenDeviceDB links to each project's own instructions and tools; nothing is flashed from this site. Flashing is at your own risk and may void the warranty.
- ID
- heltec/wireless-paper
- Category
- single-board
- Vendor support
- Unknown
- chips
- ESP32S3
- Updated
- 2026-11-16
Being worked on
No live claim. If you start working on this device, claim it so nobody duplicates your work.
Interfaces
No interface documented yet.
Projects
| Project | Kind | Origin | License | Freedom |
|---|---|---|---|---|
| CircuitPython 10.3.2 (heltec_wireless_paper) | firmware | community | MIT | Still non-free: Wi-Fi, Bluetooth · Cloud: noneCircuitPython 10.3.2 board definition heltec_wireless_paper (ESP32S3). Modules and working features are specific to the board and release. USB IDs identify CircuitPython firmware, can change with firmware or bootloader, and do not uniquely prove a physical board. This is not an OpenDeviceDB hardware test. Espressif wireless stacks include vendor binaries. |
| Meshtastic (heltec-wireless-paper; active) | firmware | community | GPL-3.0 | Still non-free: not stated · Cloud: noneUpstream hardware model 49 (HELTEC_WIRELESS_PAPER), target heltec-wireless-paper, architecture esp32-s3. Listed as actively supported. Upstream support-level code: 1. Board revisions, attached radio modules and frequency variants must match the upstream instructions. This is not an OpenDeviceDB hardware test. ESP32 wireless stacks may require vendor blobs; this index does not audit every component's freedom. |
What "still non-free" and "cloud" mean
What stays proprietary or depends on the vendor's cloud once the project is in use, from the project's own documentation.
- vendor blobs
- proprietary files extracted from the stock firmware
- stock firmware
- the stock firmware stays on the device; the project only talks to it
- modem
- cellular modem firmware
- GPU
- graphics driver or firmware
- Wi-Fi
- Wi-Fi driver or firmware
- Bluetooth
- Bluetooth firmware
- camera
- camera driver or image processing
- sensors
- sensor hub or sensor drivers
- bootloader
- boot firmware
- other
- another proprietary part
- Cloud: none
- works fully locally
- Cloud: only at setup
- a vendor account is needed once, e.g. to obtain a local key
- Cloud: optional
- cloud features exist but are not needed
- Cloud: required
- does not work without the vendor's cloud
- Cloud: unknown
- not known
Verification
Not verified. A "verified on hardware" badge requires a replayable test (hardware-replay) run on a real device with a stated firmware version.
Provenance
- CircuitPython firmware boards (MIT (individual board SPDX licences apply), fetched 2026-11-16) · about this source
- Meshtastic mesh radios (GPL-3.0, fetched 2026-11-16) · about this source
AI assistance not stated.
Status and claims as of the build date (2026-11-16). Data licensed CC BY-SA 4.0; imported data keeps its upstream license.

