OpenDeviceDB

Devices / ip-camera

Jooan F2T

Open firmwareImported

A free replacement firmware exists.

Get started

One known way to put open firmware or software on this device, easiest first. Each one links to the project's own instructions.

Before you start
  • Back up your data and settings (and the stock firmware, when the guide says how).
  • Check the exact model, hardware revision and firmware version against the guide: a close model may not work.
  • Charge the battery or use a stable power supply; do not unplug during the install.

Flash thingino with an SPI programmer (device must be opened)

Hard

Opening, soldering or a programmer · thingino

You need
SPI flash programmer (CH341A), SOIC-8 test clip
Device opened
Yes
Reversible
Yes

Back up the stock flash first. Some cameras can instead be flashed without opening them, from an SD card or over USB with the Ingenic cloner, or through a serial console: see the guide and the camera's wiki page, if it has one.

No install report yet. · Report how it went

Follow the official guide

OpenDeviceDB links to each project's own instructions and tools; nothing is flashed from this site. Flashing is at your own risk and may void the warranty.

ID
jooan/f2t
Category
ip-camera
Vendor support
Unknown
chips
T30X, SC4246
Updated
2026-10-17
Curate this record on GitHubJSONClaim this device

Being worked on

No live claim. If you start working on this device, claim it so nobody duplicates your work.

Interfaces

No interface documented yet.

Projects

ProjectKindOriginLicense
thingino (T30X, SC4246)firmwarecommunityMIT

Verification

Not verified. A "verified on hardware" badge requires a replayable test (hardware-replay) run on a real device with a stated firmware version.

Provenance

AI assistance not stated.

Status and claims as of the build date (2026-10-18). Data licensed CC BY-SA 4.0; imported data keeps its upstream license.