OpenDeviceDB

Devices / other

LoraTap SC411WSC-EU

Also known as LoraTap SC411WSC-EU RF Remote

Open firmwareImported

A free replacement firmware exists.

Curtain switch, controlled locally over the Tuya protocol by tuya-local (stock firmware, no cloud).

Get started

2 known ways to put open firmware or software on this device, easiest first. Each one links to the project's own instructions.

Before you start
  • Back up your data and settings (and the stock firmware, when the guide says how).
  • Check the exact model, hardware revision and firmware version against the guide: a close model may not work.
  • Charge the battery or use a stable power supply; do not unplug during the install.

Use tuya-local (nothing is flashed)

Medium

Needs a cable or the command line · tuya-local

You need
Home Assistant (tuya-local is installed through HACS), Tuya / Smart Life app account (to get the device's local key)
Device opened
No
Brick risk
None
Reversible
Yes

No flashing: set the device up in the Tuya or Smart Life app first; tuya-local then controls it on your network with its device id and local key. Re-pairing in the app changes the local key.

No install report yet. · Report how it went

Follow the official guide

Flash over the air with Tasmota

Medium

Needs a cable or the command line · Tasmota

You need
Linux computer with Wi-Fi (e.g. Raspberry Pi)
Device opened
No
Brick risk
Low
Reversible
Partly
Firmware
tuya-convert only works on Tuya firmware released before its 2020 patch; patched devices must be flashed over serial.

No install report yet. · Report how it went

Open the official installerRead the guide first

OpenDeviceDB links to each project's own instructions and tools; nothing is flashed from this site. Flashing is at your own risk and may void the warranty.

ID
loratap/sc411wsc-eu
Category
other
Vendor support
Unknown
chips
ESP8266
sku
tuya:75zgxageqaovbtgg
Updated
2026-10-17
Curate this record on GitHubJSONClaim this device

Being worked on

No live claim. If you start working on this device, claim it so nobody duplicates your work.

Interfaces

No interface documented yet.

Projects

ProjectKindOriginLicense
TasmotafirmwarecommunityGPL-3.0
tuya-localintegrationcommunityMIT

Verification

Not verified. A "verified on hardware" badge requires a replayable test (hardware-replay) run on a real device with a stated firmware version.

Provenance

AI assistance not stated.

Status and claims as of the build date (2026-10-18). Data licensed CC BY-SA 4.0; imported data keeps its upstream license.