Mavercade Rev3
A free replacement firmware exists.
Named controller or arcade interface listed in GP2040-CE downloads (configuration: MavercadeRev3). Upstream classifies the hardware design as closed source; the controller firmware is open. Console compatibility depends on the mode and any required accessories; this is not a hardware test.
Get started
One known way to put open firmware or software on this device, easiest first. Each one links to the project's own instructions.
- Back up your data and settings (and the stock firmware, when the guide says how).
- Check the exact model, hardware revision and firmware version against the guide: a close model may not work.
- Charge the battery or use a stable power supply; do not unplug during the install.
Install GP2040-CE over USB (bootloader unlock)
Install: medium
Install GP2040-CE over USB (bootloader unlock)Needs a cable or the command line · GP2040-CE
- Device opened
- No
- Firmware
- Use the MavercadeRev3 build for this exact hardware revision. Follow the board's bootloader instructions and the official download selection.
The installation guide describes USB bootloader / UF2 installation. Button layout, pin assignments and firmware configuration must match the controller. See the upstream compatibility documentation for each console and input mode.
No install report yet. · Report how it went
OpenDeviceDB links to each project's own instructions and tools; nothing is flashed from this site. Flashing is at your own risk and may void the warranty.
- ID
- mavercade/rev3
- Category
- game-controller
- Vendor support
- Unknown
- Updated
- 2026-11-01
Being worked on
No live claim. If you start working on this device, claim it so nobody duplicates your work.
Interfaces
No interface documented yet.
Projects
| Project | Kind | Origin | License |
|---|---|---|---|
| GP2040-CE | firmware | community | MIT |
| Controller hardware / product | other | community | not stated |
Verification
Not verified. A "verified on hardware" badge requires a replayable test (hardware-replay) run on a real device with a stated firmware version.
Provenance
- GP2040-CE controllers (MIT, fetched 2026-11-01) · about this source
AI assistance not stated.
Status and claims as of the build date (2026-11-01). Data licensed CC BY-SA 4.0; imported data keeps its upstream license.