OpenDeviceDB

Devices / router

Meraki MX65W

Open firmwareImported

A free replacement firmware exists.

Get started

One known way to put open firmware or software on this device, easiest first. Each one links to the project's own instructions.

Before you start
  • Back up your data and settings (and the stock firmware, when the guide says how).
  • Check the exact model, hardware revision and firmware version against the guide: a close model may not work.
  • Charge the battery or use a stable power supply; do not unplug during the install.

Install OpenWrt

Medium

Needs a cable or the command line · OpenWrt

You need
USB drive or the target disk, Computer to write the image
Device opened
No

Table of Hardware method: U-Boot USB recovery (write the image to a USB drive or disk). Table of Hardware note: Snapshot builds don't build ramdisk/initramfs yet. Patch on mailing list, build from source/check forum at the moment for initial install.

No install report yet. · Report how it went

Open the official installerRead the guide first

OpenDeviceDB links to each project's own instructions and tools; nothing is flashed from this site. Flashing is at your own risk and may void the warranty.

ID
meraki/mx65w
Category
router
Vendor support
Unknown
chips
Broadcom BCM58625
fcc id
UDX-6004-7015
Updated
2026-10-17
Curate this record on GitHubJSONClaim this device

Being worked on

No live claim. If you start working on this device, claim it so nobody duplicates your work.

Interfaces

No interface documented yet.

Projects

ProjectKindOriginLicense
OpenWrtfirmwarecommunityGPL-2.0

Verification

Not verified. A "verified on hardware" badge requires a replayable test (hardware-replay) run on a real device with a stated firmware version.

Provenance

AI assistance not stated.

Status and claims as of the build date (2026-10-18). Data licensed CC BY-SA 4.0; imported data keeps its upstream license.