milkv Duo S (RISC-V)
Also known as Duo S (RISC-V), milkv-duos-riscv
A free replacement firmware exists.
Armbian standard configuration (milkv-duos-riscv.conf). Kernel branches: edge; board family: sophgo-sg200x-riscv64. Availability and working features depend on the selected image and branch; a build configuration is not an OpenDeviceDB hardware test.
Get started
One known way to put open firmware or software on this device, easiest first. Each one links to the project's own instructions.
- Back up your data and settings (and the stock firmware, when the guide says how).
- Check the exact model, hardware revision and firmware version against the guide: a close model may not work.
- Charge the battery or use a stable power supply; do not unplug during the install.
Install Armbian
Install: mediumNeeds a cable or the command line · Armbian
- Device opened
- No
- Firmware
- Use the exact Duo S (RISC-V) board revision and an image for the selected kernel branch (edge). standard configuration.
Check upstream image availability and the board-specific page. SD, eMMC, SPI and USB installation routes vary by board; no universal media or recovery procedure is implied.
No install report yet. · Report how it went
OpenDeviceDB links to each project's own instructions and tools; nothing is flashed from this site. Flashing is at your own risk and may void the warranty.
- ID
- milkv/duo-s-risc-v
- Category
- single-board
- Vendor support
- Unknown
- Updated
- 2026-11-16
Being worked on
No live claim. If you start working on this device, claim it so nobody duplicates your work.
Interfaces
No interface documented yet.
Projects
| Project | Kind | Origin | License | Freedom |
|---|---|---|---|---|
| Armbian (standard configuration; milkv-duos-riscv.conf) | firmware | community | GPL-2.0 | Still non-free: not stated · Cloud: noneArmbian standard configuration (milkv-duos-riscv.conf). Kernel branches: edge; board family: sophgo-sg200x-riscv64. Availability and working features depend on the selected image and branch; a build configuration is not an OpenDeviceDB hardware test. Bootloader, DDR initialization, trusted firmware and peripheral firmware may use vendor binaries. This entry does not establish a fully free firmware stack. |
What "still non-free" and "cloud" mean
What stays proprietary or depends on the vendor's cloud once the project is in use, from the project's own documentation.
- vendor blobs
- proprietary files extracted from the stock firmware
- stock firmware
- the stock firmware stays on the device; the project only talks to it
- modem
- cellular modem firmware
- GPU
- graphics driver or firmware
- Wi-Fi
- Wi-Fi driver or firmware
- Bluetooth
- Bluetooth firmware
- camera
- camera driver or image processing
- sensors
- sensor hub or sensor drivers
- bootloader
- boot firmware
- other
- another proprietary part
- Cloud: none
- works fully locally
- Cloud: only at setup
- a vendor account is needed once, e.g. to obtain a local key
- Cloud: optional
- cloud features exist but are not needed
- Cloud: required
- does not work without the vendor's cloud
- Cloud: unknown
- not known
Verification
Not verified. A "verified on hardware" badge requires a replayable test (hardware-replay) run on a real device with a stated firmware version.
Provenance
- Armbian board configurations (GPL-2.0, fetched 2026-11-16) · about this source
AI assistance not stated.
Status and claims as of the build date (2026-11-16). Data licensed CC BY-SA 4.0; imported data keeps its upstream license.

