Devices / single-board
PC Engines ALIX 2e18
Open firmwareImported
A free replacement firmware exists.
Get started
2 known ways to put open firmware or software on this device, easiest first. Each one links to the project's own instructions.
Before you start- Back up your data and settings (and the stock firmware, when the guide says how).
- Check the exact model, hardware revision and firmware version against the guide: a close model may not work.
- Charge the battery or use a stable power supply; do not unplug during the install.
Install OpenWrt from an SD card
MediumNeeds a cable or the command line · OpenWrt
- You need
- CompactFlash card and a card reader
- Device opened
- No
Table of Hardware method: CF card (write the image to a CompactFlash card).
No install report yet. · Report how it went
Install OpenWrt
MediumNeeds a cable or the command line · OpenWrt
- You need
- USB drive or the target disk, Computer to write the image
- Device opened
- No
Table of Hardware method: x86 installation (write the image to a USB drive or disk).
No install report yet. · Report how it went
OpenDeviceDB links to each project's own instructions and tools; nothing is flashed from this site. Flashing is at your own risk and may void the warranty.
- ID
- pc-engines/alix-2e18
- Category
- single-board
- Vendor support
- Unknown
- chips
- AMD Geode LX800
- Updated
- 2026-10-17
Being worked on
No live claim. If you start working on this device, claim it so nobody duplicates your work.
Interfaces
No interface documented yet.
Projects
| Project | Kind | Origin | License |
|---|
| OpenWrt | firmware | community | GPL-2.0 |
Verification
Not verified. A "verified on hardware" badge requires a replayable test (hardware-replay) run on a real device with a stated firmware version.
Provenance
AI assistance not stated.
Status and claims as of the build date (2026-10-18). Data licensed CC BY-SA 4.0; imported data keeps its upstream license.