PINE64 PineTab2
Also known as PineTab2, pinetab2
A free replacement firmware exists.
Ubuntu Touch focal; Native port pinetab2; development stage 3/5. Marked supported upstream. Feature support is model- and release-specific. This is not an OpenDeviceDB hardware test. Original listing: PineTab2.
Get started
One known way to put open firmware or software on this device, easiest first. Each one links to the project's own instructions.
- Back up your data and settings (and the stock firmware, when the guide says how).
- Check the exact model, hardware revision and firmware version against the guide: a close model may not work.
- Charge the battery or use a stable power supply; do not unplug during the install.
Install Ubuntu Touch
Install: hardOpening, soldering or a programmer · Ubuntu Touch
- Device opened
- No
- Firmware
- Read the exact device page for Android/vendor firmware prerequisites and supported variants; they are not inferred from another model or a generic image.
The upstream page does not list installer support; consult its manual port instructions. Unlocking the bootloader and installation can erase data. Ubuntu Touch focal; Native port pinetab2; development stage 3/5. Marked supported upstream. Feature support is model- and release-specific. This is not an OpenDeviceDB hardware test. Original listing: PineTab2.
No install report yet. · Report how it went
OpenDeviceDB links to each project's own instructions and tools; nothing is flashed from this site. Flashing is at your own risk and may void the warranty.
- ID
- pine64/pinetab2
- Category
- tablet
- Vendor support
- Unknown
- Updated
- 2026-11-16
Being worked on
No live claim. If you start working on this device, claim it so nobody duplicates your work.
Interfaces
No interface documented yet.
Projects
| Project | Kind | Origin | License | Freedom |
|---|---|---|---|---|
| Ubuntu Touch (pinetab2; focal; supported) | firmware | community | not stated | Still non-free: not stated · Cloud: noneUbuntu Touch focal; Native port pinetab2; development stage 3/5. Marked supported upstream. Feature support is model- and release-specific. This is not an OpenDeviceDB hardware test. Original listing: PineTab2. Native ports can still require proprietary peripheral firmware; this listing does not audit every component. |
What "still non-free" and "cloud" mean
What stays proprietary or depends on the vendor's cloud once the project is in use, from the project's own documentation.
- vendor blobs
- proprietary files extracted from the stock firmware
- stock firmware
- the stock firmware stays on the device; the project only talks to it
- modem
- cellular modem firmware
- GPU
- graphics driver or firmware
- Wi-Fi
- Wi-Fi driver or firmware
- Bluetooth
- Bluetooth firmware
- camera
- camera driver or image processing
- sensors
- sensor hub or sensor drivers
- bootloader
- boot firmware
- other
- another proprietary part
- Cloud: none
- works fully locally
- Cloud: only at setup
- a vendor account is needed once, e.g. to obtain a local key
- Cloud: optional
- cloud features exist but are not needed
- Cloud: required
- does not work without the vendor's cloud
- Cloud: unknown
- not known
Verification
Not verified. A "verified on hardware" badge requires a replayable test (hardware-replay) run on a real device with a stated firmware version.
Provenance
- Ubuntu Touch devices (CC-BY-SA-4.0 (device site); GPL-3.0 (installer configurations), fetched 2026-11-16) · about this source
AI assistance not stated.
Status and claims as of the build date (2026-11-16). Data licensed CC BY-SA 4.0; imported data keeps its upstream license.

