Purism Librem 14: open firmware (coreboot)

Supported by coreboot (src/mainboard/purism/librem_cnl). Released 2021. Flash: SPI SOIC-8, soldered. flashrom: yes.

Get started

One known way to put open firmware or software on this device, easiest first. Each one links to the project's own instructions.

Before you start

Back up your data and settings (and the stock firmware, when the guide says how).
Check the exact model, hardware revision and firmware version against the guide: a close model may not work.
Charge the battery or use a stable power supply; do not unplug during the install.

Flash coreboot with an SPI programmer (device must be opened)

Hard

Opening, soldering or a programmer · coreboot

You need: SPI flash programmer (CH341A), SOIC-8 test clip
Device opened: Yes
Brick risk: High
Reversible: Yes

There are no official images: you build coreboot for this board from source (some boards need vendor binaries extracted from the stock firmware). Flash chip: SOIC-8. board_info.txt says flashrom supports the board, so internal flashing may work, but the stock firmware often locks the flash. Back up the original flash contents first: writing them back with a programmer restores the stock firmware.

No install report yet. · Report how it went

Follow the official guide

OpenDeviceDB links to each project's own instructions and tools; nothing is flashed from this site. Flashing is at your own risk and may void the warranty.

Being worked on

No live claim. If you start working on this device, claim it so nobody duplicates your work.

Interfaces

Projects

Project	Kind	Origin	License
coreboot	firmware	community	GPL-2.0

Project

Kind

Origin

License

coreboot

firmware

community

GPL-2.0

Verification

Not verified. A "verified on hardware" badge requires a replayable test (hardware-replay) run on a real device with a stated firmware version.

Provenance

Status and claims as of the build date (2026-10-18). Data licensed CC BY-SA 4.0; imported data keeps its upstream license.