Rigol VS5102
Fully drivable by open code over the stock firmware.
Measurement acquisition via libsigrok's rigol-ds driver (oscilloscope). Features depend on the model, firmware and libsigrok version; this is not an OpenDeviceDB hardware test.
Get started
One known way to put open firmware or software on this device, easiest first. Each one links to the project's own instructions.
- Back up your data and settings (and the stock firmware, when the guide says how).
- Check the exact model, hardware revision and firmware version against the guide: a close model may not work.
- Charge the battery or use a stable power supply; do not unplug during the install.
Use sigrok (nothing is flashed)
Install: medium
Use sigrok (nothing is flashed)Needs a cable or the command line · sigrok
- Device opened
- No
- Firmware
- Upstream profile: 2 analog channels; digital acquisition not enabled in this driver. Check the model's supported acquisition modes and connection in the upstream documentation.
Install a libsigrok version containing this model and its required dependencies. Use sigrok-cli or a frontend appropriate to the instrument (PulseView is for logic/oscilloscope acquisition). Consult README.devices and the driver source for model-specific setup.
No install report yet. · Report how it went
OpenDeviceDB links to each project's own instructions and tools; nothing is flashed from this site. Flashing is at your own risk and may void the warranty.
- ID
- rigol/vs5102
- Category
- test-instrument
- Vendor support
- Unknown
- Updated
- 2026-11-01
Being worked on
No live claim. If you start working on this device, claim it so nobody duplicates your work.
Interfaces
No interface documented yet.
Projects
| Project | Kind | Origin | License | Freedom |
|---|---|---|---|---|
| sigrok (rigol-ds) | driver | community | GPL-3.0-or-later | Still non-free: not statedThe open driver reads measurements from the device's existing firmware. This model table does not establish the firmware's license or remaining proprietary components. |
What "still non-free" and "cloud" mean
What "still non-free" and "cloud" meanWhat stays proprietary or depends on the vendor's cloud once the project is in use, from the project's own documentation.
- vendor blobs
- proprietary files extracted from the stock firmware
- stock firmware
- the stock firmware stays on the device; the project only talks to it
- modem
- cellular modem firmware
- GPU
- graphics driver or firmware
- Wi-Fi
- Wi-Fi driver or firmware
- Bluetooth
- Bluetooth firmware
- camera
- camera driver or image processing
- sensors
- sensor hub or sensor drivers
- bootloader
- boot firmware
- other
- another proprietary part
- Cloud: none
- works fully locally
- Cloud: only at setup
- a vendor account is needed once, e.g. to obtain a local key
- Cloud: optional
- cloud features exist but are not needed
- Cloud: required
- does not work without the vendor's cloud
- Cloud: unknown
- not known
Verification
Not verified. A "verified on hardware" badge requires a replayable test (hardware-replay) run on a real device with a stated firmware version.
Provenance
- sigrok measurement instruments (GPL-3.0-or-later, fetched 2026-11-01) · about this source
AI assistance not stated.
Status and claims as of the build date (2026-11-01). Data licensed CC BY-SA 4.0; imported data keeps its upstream license.