Devices / vacuum-robot
Roborock S7 Pro Ultra
ControllableImported
Fully drivable by open code over the stock firmware.
Rooted, then runs Valetudo for cloud-free local control. Valetudo binary: armv7-lowmem.
Get started
One known way to put open firmware or software on this device, easiest first. Each one links to the project's own instructions.
Before you start- Back up your data and settings (and the stock firmware, when the guide says how).
- Check the exact model, hardware revision and firmware version against the guide: a close model may not work.
- Charge the battery or use a stable power supply; do not unplug during the install.
Install Valetudo over USB (bootloader unlock)
HardOpening, soldering or a programmer · Valetudo
- You need
- Laptop running Linux natively with sunxi-tools, Micro USB cable
- Device opened
- Yes
Full disassembly to reach a test point under the mainboard, breaking the warranty seals; no soldering.
No install report yet. · Report how it went
OpenDeviceDB links to each project's own instructions and tools; nothing is flashed from this site. Flashing is at your own risk and may void the warranty.
- ID
- roborock/s7-pro-ultra
- Category
- vacuum-robot
- Vendor support
- Unknown
- Updated
- 2026-10-17
Being worked on
No live claim. If you start working on this device, claim it so nobody duplicates your work.
Interfaces
No interface documented yet.
Projects
Verification
Not verified. A "verified on hardware" badge requires a replayable test (hardware-replay) run on a real device with a stated firmware version.
Provenance
AI assistance not stated.
Status and claims as of the build date (2026-10-18). Data licensed CC BY-SA 4.0; imported data keeps its upstream license.