Devices / radio

Seeed Studio Wio Tracker L2

Also known as Seeed Wio Tracker L2, SEEED_WIO_TRACKER_L2, seeed_wio_tracker_L2

Open firmwareInstall: mediumImported

A free replacement firmware exists.

Meshtastic LoRa mesh firmware listing. Upstream hardware model 137 (SEEED_WIO_TRACKER_L2), target seeed_wio_tracker_L2, architecture esp32-s3. Listed as actively supported. Upstream support-level code: 1. Board revisions, attached radio modules and frequency variants must match the upstream instructions. This is not an OpenDeviceDB hardware test.

Get started

One known way to put open firmware or software on this device, easiest first. Each one links to the project's own instructions.

Before you start
  • Back up your data and settings (and the stock firmware, when the guide says how).
  • Check the exact model, hardware revision and firmware version against the guide: a close model may not work.
  • Charge the battery or use a stable power supply; do not unplug during the install.

Install Meshtastic over USB (bootloader unlock)

Install: medium

Needs a cable or the command line · Meshtastic

Device opened
No
Firmware
Select the exact seeed_wio_tracker_L2 board target and hardware revision. Upstream marks this device as requiring DFU; follow its model-specific bootloader instructions.

Read the hardware and installation documentation for the complete board/module combination and existing bootloader before installing.

No install report yet. · Report how it went

OpenDeviceDB links to each project's own instructions and tools; nothing is flashed from this site. Flashing is at your own risk and may void the warranty.

ID
seeed-studio/wio-tracker-l2
Category
radio
Vendor support
Unknown
Updated
2026-11-16
Curate this record on GitHubJSONClaim this device

Being worked on

No live claim. If you start working on this device, claim it so nobody duplicates your work.

Interfaces

No interface documented yet.

Projects

ProjectKindOriginLicenseFreedom
Meshtastic (seeed_wio_tracker_L2; active)firmwarecommunityGPL-3.0Still non-free: not stated · Cloud: noneUpstream hardware model 137 (SEEED_WIO_TRACKER_L2), target seeed_wio_tracker_L2, architecture esp32-s3. Listed as actively supported. Upstream support-level code: 1. Board revisions, attached radio modules and frequency variants must match the upstream instructions. This is not an OpenDeviceDB hardware test. ESP32 wireless stacks may require vendor blobs; this index does not audit every component's freedom.
What "still non-free" and "cloud" mean

What stays proprietary or depends on the vendor's cloud once the project is in use, from the project's own documentation.

vendor blobs
proprietary files extracted from the stock firmware
stock firmware
the stock firmware stays on the device; the project only talks to it
modem
cellular modem firmware
GPU
graphics driver or firmware
Wi-Fi
Wi-Fi driver or firmware
Bluetooth
Bluetooth firmware
camera
camera driver or image processing
sensors
sensor hub or sensor drivers
bootloader
boot firmware
other
another proprietary part
Cloud: none
works fully locally
Cloud: only at setup
a vendor account is needed once, e.g. to obtain a local key
Cloud: optional
cloud features exist but are not needed
Cloud: required
does not work without the vendor's cloud
Cloud: unknown
not known

Verification

Not verified. A "verified on hardware" badge requires a replayable test (hardware-replay) run on a real device with a stated firmware version.

Provenance

AI assistance not stated.

Status and claims as of the build date (2026-11-16). Data licensed CC BY-SA 4.0; imported data keeps its upstream license.