Devices / router
TP-Link TL-WR1043ND v3
Open firmwareImported
A free replacement firmware exists.
Get started
3 known ways to put open firmware or software on this device, easiest first. Each one links to the project's own instructions.
Before you start- Back up your data and settings (and the stock firmware, when the guide says how).
- Check the exact model, hardware revision and firmware version against the guide: a close model may not work.
- Charge the battery or use a stable power supply; do not unplug during the install.
Upload OpenWrt in the stock web interface
EasyNo tools, the device stays closed · OpenWrt
- You need
- Computer with a web browser
- Device opened
- No
- Brick risk
- Low
Table of Hardware method: GUI OEM (upload the factory image through the stock firmware's upgrade page).
No install report yet. · Report how it went
Install OpenWrt
MediumNeeds a cable or the command line · OpenWrt
- You need
- Computer with a TFTP server, Ethernet cable
- Device opened
- No
Table of Hardware method: U-Boot TFTP recovery (send the image to the bootloader's network recovery over TFTP).
No install report yet. · Report how it went
Flash OpenWrt over serial (device must be opened)
HardOpening, soldering or a programmer · OpenWrt
- You need
- USB-serial adapter (3.3 V), Computer with a TFTP server, Ethernet cable
- Device opened
- Yes
Table of Hardware method: U-Boot TFTP + serial recovery (flash from the bootloader over a serial console).
No install report yet. · Report how it went
OpenDeviceDB links to each project's own instructions and tools; nothing is flashed from this site. Flashing is at your own risk and may void the warranty.
- ID
- tp-link/tl-wr1043nd-v3
- Category
- router
- Vendor support
- Unknown
- chips
- Qualcomm Atheros QCA9558
- fcc id
- TE7WR1043NDV3
- Updated
- 2026-10-17
Being worked on
No live claim. If you start working on this device, claim it so nobody duplicates your work.
Interfaces
No interface documented yet.
Projects
| Project | Kind | Origin | License |
|---|
| OpenWrt | firmware | community | GPL-2.0 |
Verification
Not verified. A "verified on hardware" badge requires a replayable test (hardware-replay) run on a real device with a stated firmware version.
Provenance
AI assistance not stated.
Status and claims as of the build date (2026-10-18). Data licensed CC BY-SA 4.0; imported data keeps its upstream license.