Tripp Lite AVRX750UD (USB (protocol 2010))
Fully drivable by open code over the stock firmware.
Listed by Network UPS Tools (UPS). Host-side drivers communicate with the existing device firmware. Connection and hardware constraints apply; upstream listing is not an OpenDeviceDB hardware test.
Get started
One known way to put open firmware or software on this device, easiest first. Each one links to the project's own instructions.
- Back up your data and settings (and the stock firmware, when the guide says how).
- Check the exact model, hardware revision and firmware version against the guide: a close model may not work.
- Charge the battery or use a stable power supply; do not unplug during the install.
Use NUT usbhid-ups (nothing is flashed)
Install: medium
Use NUT usbhid-ups (nothing is flashed)Needs a cable or the command line · NUT usbhid-ups
- Device opened
- No
- Firmware
- USB (protocol 2010); driver: usbhid-ups; HCL protocol origin: published protocol.
Install NUT on the host and configure the listed driver, connection and parameters for the exact unit. Consult the HCL and driver manual for supported commands and limitations; no replacement device firmware is installed.
No install report yet. · Report how it went
OpenDeviceDB links to each project's own instructions and tools; nothing is flashed from this site. Flashing is at your own risk and may void the warranty.
- ID
- tripp-lite/avrx750ud-usb-protocol-2010
- Category
- ups
- Vendor support
- Unknown
- Updated
- 2026-11-01
Being worked on
No live claim. If you start working on this device, claim it so nobody duplicates your work.
Interfaces
No interface documented yet.
Projects
| Project | Kind | Origin | License | Freedom |
|---|---|---|---|---|
| NUT usbhid-ups | driver | community | GPL-2.0-or-later | Still non-free: not statedNUT provides host-side monitoring/control; it does not replace the device firmware. The firmware's license and remaining proprietary components are not established by this HCL entry. |
| NUT hardware compatibility list | other | community | not stated | not stated |
What "still non-free" and "cloud" mean
What "still non-free" and "cloud" meanWhat stays proprietary or depends on the vendor's cloud once the project is in use, from the project's own documentation.
- vendor blobs
- proprietary files extracted from the stock firmware
- stock firmware
- the stock firmware stays on the device; the project only talks to it
- modem
- cellular modem firmware
- GPU
- graphics driver or firmware
- Wi-Fi
- Wi-Fi driver or firmware
- Bluetooth
- Bluetooth firmware
- camera
- camera driver or image processing
- sensors
- sensor hub or sensor drivers
- bootloader
- boot firmware
- other
- another proprietary part
- Cloud: none
- works fully locally
- Cloud: only at setup
- a vendor account is needed once, e.g. to obtain a local key
- Cloud: optional
- cloud features exist but are not needed
- Cloud: required
- does not work without the vendor's cloud
- Cloud: unknown
- not known
Verification
Not verified. A "verified on hardware" badge requires a replayable test (hardware-replay) run on a real device with a stated firmware version.
Provenance
- Network UPS Tools (GPL-2.0-or-later, fetched 2026-11-01) · about this source
AI assistance not stated.
Status and claims as of the build date (2026-11-01). Data licensed CC BY-SA 4.0; imported data keeps its upstream license.