OpenDeviceDB

Devices / other

Ubiquiti NanoStation Loco M2 XW

Open firmwareImported

A free replacement firmware exists.

Get started

One known way to put open firmware or software on this device, easiest first. Each one links to the project's own instructions.

Before you start
  • Back up your data and settings (and the stock firmware, when the guide says how).
  • Check the exact model, hardware revision and firmware version against the guide: a close model may not work.
  • Charge the battery or use a stable power supply; do not unplug during the install.

Install OpenWrt

Medium

Needs a cable or the command line · OpenWrt

You need
Computer with an SSH or telnet client
Device opened
No

Table of Hardware method: Sysupgrade (flash from a command line on the running firmware). Table of Hardware note: Flashing through the system upgrade GUI is only possible with the unsigned OEM firmware v5.6.12 or v5.6.15!

No install report yet. · Report how it went

Open the official installerRead the guide first

OpenDeviceDB links to each project's own instructions and tools; nothing is flashed from this site. Flashing is at your own risk and may void the warranty.

ID
ubiquiti/nanostation-loco-m2-xw
Category
other
Vendor support
Unknown
chips
Atheros AR7240
fcc id
SWX-M2L
Updated
2026-10-17
Curate this record on GitHubJSONClaim this device

Being worked on

No live claim. If you start working on this device, claim it so nobody duplicates your work.

Interfaces

No interface documented yet.

Projects

ProjectKindOriginLicense
OpenWrtfirmwarecommunityGPL-2.0

Verification

Not verified. A "verified on hardware" badge requires a replayable test (hardware-replay) run on a real device with a stated firmware version.

Provenance

AI assistance not stated.

Status and claims as of the build date (2026-10-18). Data licensed CC BY-SA 4.0; imported data keeps its upstream license.