OpenDeviceDB

Devices / vacuum-robot

Xiaomi V1

Also known as Xiaomi Mi Robot Vacuum

ControllableImported

Fully drivable by open code over the stock firmware.

Rooted, then runs Valetudo for cloud-free local control. Made by Roborock. Valetudo binary: armv7.

Get started

2 known ways to put open firmware or software on this device, easiest first. Each one links to the project's own instructions.

Before you start
  • Back up your data and settings (and the stock firmware, when the guide says how).
  • Check the exact model, hardware revision and firmware version against the guide: a close model may not work.
  • Charge the battery or use a stable power supply; do not unplug during the install.

Flash over the air with Valetudo

Medium

Needs a cable or the command line · Valetudo

You need
Laptop with Wi-Fi
Device opened
No
Firmware
Valetudo qualifies this method: "before 2020-03".

Over the robot's own Wi-Fi access point; no disassembly, no cables.

No install report yet. · Report how it went

Follow the official guide

Flash Valetudo over serial (device must be opened)

Hard

Opening, soldering or a programmer · Valetudo

You need
USB-serial adapter (3.3 V), Soldering iron
Device opened
Yes
Firmware
Valetudo qualifies this method: "after 2020-03".

Full disassembly and soldering wires to test points; voids the warranty.

No install report yet. · Report how it went

Follow the official guide

OpenDeviceDB links to each project's own instructions and tools; nothing is flashed from this site. Flashing is at your own risk and may void the warranty.

ID
xiaomi/v1
Category
vacuum-robot
Vendor support
Unknown
Updated
2026-10-17
Curate this record on GitHubJSONClaim this device

Being worked on

No live claim. If you start working on this device, claim it so nobody duplicates your work.

Interfaces

No interface documented yet.

Projects

ProjectKindOriginLicense
ValetudointegrationcommunityApache-2.0
Valetudo rooting instructions (OTA (before 2020-03))othercommunitynot stated
Valetudo rooting instructions (Vinda (after 2020-03))othercommunitynot stated

Verification

Not verified. A "verified on hardware" badge requires a replayable test (hardware-replay) run on a real device with a stated firmware version.

Provenance

AI assistance not stated.

Status and claims as of the build date (2026-10-18). Data licensed CC BY-SA 4.0; imported data keeps its upstream license.