Zemismart M515EGB

Also known as Zemismart Updated RF Remote Roller Shade

Open firmwareImported

A free replacement firmware exists.

Get started

2 known ways to put open firmware or software on this device, easiest first. Each one links to the project's own instructions.

Before you start

Back up your data and settings (and the stock firmware, when the guide says how).
Check the exact model, hardware revision and firmware version against the guide: a close model may not work.
Charge the battery or use a stable power supply; do not unplug during the install.

Pair with Zigbee2MQTT

Medium

Needs a cable or the command line · Zigbee2MQTT

You need: Zigbee USB coordinator, Computer or Raspberry Pi running Zigbee2MQTT
Device opened: No
Brick risk: None
Reversible: Yes

No flashing: the device keeps its firmware and is paired to your own Zigbee network; remove it from Zigbee2MQTT to undo.

No install report yet. · Report how it went

Follow the official guide

Flash over the air with Tasmota

Medium

Needs a cable or the command line · Tasmota

You need: Linux computer with Wi-Fi (e.g. Raspberry Pi)
Device opened: No
Brick risk: Low
Reversible: Partly
Firmware: tuya-convert only works on Tuya firmware released before its 2020 patch; patched devices must be flashed over serial.

No install report yet. · Report how it went

Open the official installer Read the guide first

OpenDeviceDB links to each project's own instructions and tools; nothing is flashed from this site. Flashing is at your own risk and may void the warranty.

ID: zemismart/m515egb
Category: other
Vendor support: Unknown
chips: ESP8266
zigbee model: owvfni3, u1rkty3, aabybja, mcdj3aq, TS0601, zo2pocs, dank5zs
Updated: 2026-10-17

Curate this record on GitHub JSON Claim this device

Being worked on

No live claim. If you start working on this device, claim it so nobody duplicates your work.

Interfaces

No interface documented yet.

Projects

Project	Kind	Origin	License
Tasmota	firmware	community	GPL-3.0
Zigbee2MQTT	integration	community	GPL-3.0

Verification

Not verified. A "verified on hardware" badge requires a replayable test (hardware-replay) run on a real device with a stated firmware version.

Provenance

Tasmota Device Templates Repository (EPL-2.0, fetched 2026-10-17) · about this source
Zigbee2MQTT (MIT, fetched 2026-10-17) · about this source

AI assistance not stated.

Status and claims as of the build date (2026-10-18). Data licensed CC BY-SA 4.0; imported data keeps its upstream license.