Aquacomputer Quadro

ControllableInstall: mediumAI assisted

Fully drivable by open code over the stock firmware.

Temperature, flow and fan telemetry, with direct fan PWM control. Source-qualified Linux driver support; not an OpenDeviceDB hardware test.

Get started

One known way to put open firmware or software on this device, easiest first. Each one links to the project's own instructions.

Before you start

Back up your data and settings (and the stock firmware, when the guide says how).
Check the exact model, hardware revision and firmware version against the guide: a close model may not work.
Charge the battery or use a stable power supply; do not unplug during the install.

Use aquacomputer_d5next Linux hwmon driver (nothing is flashed)

Install: medium

Needs a cable or the command line · aquacomputer_d5next Linux hwmon driver

You need: Linux with aquacomputer_d5next driver enabled, lm-sensors (optional)
Device opened: No

Listed driver support: Linux 6.0 or later. These are upstream mainline baselines from the source overview; distribution configuration/backports and standalone-driver features can differ. Prefer the driver supplied by the distribution where available; consult the linked guide for the optional out-of-tree module. This route installs host software, not replacement device firmware.

No install report yet. · Report how it went

Follow the official guide

OpenDeviceDB links to each project's own instructions and tools; nothing is flashed from this site. Flashing is at your own risk and may void the warranty.

Use this device

Discover the available functions and their setup requirements.

USB technical examples

These examples and utilities demonstrate components or read an existing driver. Check each tool’s requirements.

Browse all components and applications

ID: aquacomputer/quadro
Category: peripheral
Vendor support: Unknown
usb: 0c70:f00d
Updated: 2026-11-04

Edit this record on GitHub JSON Claim this device

Being worked on

No live claim. If you start working on this device, claim it so nobody duplicates your work.

Interfaces

Interface	Transport	Status	Confidence	Spec / notes
Aquacomputer USB HID / Linux hwmon	usb	partial	not stated	spec · Per-device sensor/control coverage is documented upstream. The driver communicates with the installed device firmware through HID reports.

Projects

Project	Kind	Origin	License	Freedom
aquacomputer_d5next Linux hwmon driver	driver	community	GPL-2.0-or-later	Still non-free: not stated · Cloud: noneLocal host driver using USB HID. The installed device firmware remains in use; the driver license does not establish the device firmware license.
Aquacomputer hwmon device documentation	protocol-doc	community	not stated	not stated

What "still non-free" and "cloud" mean

What stays proprietary or depends on the vendor's cloud once the project is in use, from the project's own documentation.

vendor blobs: proprietary files extracted from the stock firmware
stock firmware: the stock firmware stays on the device; the project only talks to it
modem: cellular modem firmware
GPU: graphics driver or firmware
Wi-Fi: Wi-Fi driver or firmware
Bluetooth: Bluetooth firmware
camera: camera driver or image processing
sensors: sensor hub or sensor drivers
bootloader: boot firmware
other: another proprietary part
Cloud: none: works fully locally
Cloud: only at setup: a vendor account is needed once, e.g. to obtain a local key
Cloud: optional: cloud features exist but are not needed
Cloud: required: does not work without the vendor's cloud
Cloud: unknown: not known

Verification

none by OpenDeviceDB source review (AI-assisted), 2026-11-04
USB ID checked against the pinned driver match table and model/function scope against its README and device documentation. No hardware, kernel-module, cooling or firmware test performed.

Provenance

AI-assisted Parts of this record were produced with AI tools; check the confidence of each interface.

Status and claims as of the build date (2026-11-13). Data licensed CC BY-SA 4.0; imported data keeps its upstream license.